CE approved global warranty 400kva silent diesel genset powered by cummins engine

CE approved global warranty 400kva silent diesel genset powered by cummins Engine    

1. Specification of genset
Genset model				KH-320GF
Genset power				400KVA
Rated voltage				400/230V
Genset current				576A
Rated frequency(HZ)				50
Rated speed				1500rpm
Power factor				0.8(lagging)
Dimensions(mm) (L×W×H)				4050x1900x2200
Genset Weight(kg)				3400
2. Specification of Diesel Engine
Engine brand				Powered by Cummins
Engine model				NTAA855-G7A
Number of Cylinders				6
Cylinder arrangement				In line
Cycle				Four stroke
Induction system				Turbo, Air/Air Cooling
Combustion system				PT type fuel pump, EFC
Bore×Stroke (mm×mm)				140 x 152
Displacement (Liter)				14
Compression Ratio				14.0:1
Max. Standby Power at Rated RPM				407KW
Speed Governor				Electronic
Cooling System				Water cooled
Fuel Consumption at 100% Load				200.5g/kwh
Starting Method				DC24V Electrical starting
3. Specification of alternator
Alternator brand				Stamford
Alternator model				HCI444F
Number of Phase				3
Connecting Type				3 Phase and 4 Wires
Number of Bearing				1
Protection Grade				IP23
Altitude				≤1000m
Exciter Type				Brushless, AVR automatic voltage regulating,100% Copper winding wire
Insulation Class				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%
4. Specification of control Panel(with Smartgen HGM6110K controller)
The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function.
Main Features
HGM6110K series Genset controller integrating digital, intelligent and network techniques is used for automatic control system of Diesel Generator. It can carry out functions including automatic start/stop, data measure and alarm protective. The controller uses LCD display, optional Chinese, English, Spanish and Russian display interface with Operation easy and reliable.
HGM6110K series Genset controller uses micro-processing technique which can carryout precision measure, constant value adjustment, timing and threshold setting and etc. functions. It can be widely used in all types of Generator automatic control system for compact structure, advanced circuits, simple connections and high reliability,can be widely applied to various types of generating units automation system.
• Using microprocessor as a core, symbol LCD with backlight display, the three languages display Chinese, English and Spanish, key touch operation;
• Have a RS485 port with Modus communication protocol;
• Adapt to 3phase-4wires, single phase-2wires or 2phase-3 wires (120/240V), 50/60Hz AC power system;
• Measure and display 3 phase voltage, 3 phase current, frequency, power etc. parameter of Mains and Gens;
• Mains have over voltage, under voltage, loss phase function; Gens have over voltage, under voltage, over frequency, under frequency, over current function;
• Precision measure and display parameters about Engine;
• Control protection: Automatic crank/stop of diesel engine, load transfer(ATS control) and completely faults display protection;
• With ETS, idle control, pre-heat control, raises speed control functions, and all types of them are belong to relay output;
• Parameters setting: Allow user to modify setting and store them by inside internal FLASH memory,the parameters can not be lost even with power off.All of parameters can be set not only from the front panel, but by PC via SG72 (an adaptor,USB-LINK-RS485) module;or,through RS485 port via PC;
• Most of temperature, pressure, oil level sensor can be directly used, and also user can define sensor curve by themselves;
• Multiple crank disconnection conditions can be selected.(Speed sensor, oil pressure, gens);
• Power supply range is wide(8~35)VDC, accommodating to different starting battery voltage environments;
• All parameters use digital modulation, abandoning analog modulation using conventional electronic potentiometer, more reliability and stability;
• Modular configuration design,Flame Retardant ABS plastic shell, inserted type connection terminals, flush type installation, compact structure, easy installation.
5. The features of silent canopy
Silent Diesel Generator set combined adopt foreign technology and meticulous design; advanced design, varies kind. Here are some features as follows, Special and simple apperance design, obey the ruel of gas flow inside the silent box , ensure the smooth heat exhausting , support a nice surrounding for gensets running. The structure is compact, and can be removable. For the silent box material, we choose 2MM cold-rolled steel plate. You can find the door was sealed well, and 5CM high performance sound-absorbing cotton. Besides, we choose special car paint,with antirust and waterproof funtion. inside the box using large mufflers, and equipped with large-capacity base fuel tank, in the left and right side, there are two door for maintenance, in the front box, it has viewing windows and emergency stop button. Noise level, less than 70db at 7 meters.

                Contact information as follows, 24 hours hot line: 0086-13641580001 Skype: kaihuagenset  

Contact us if you need more details on 400kva Silent Diesel Genset. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Silent Diesel Genset、Silent Type Genset. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Silent Diesel Generator Sets